Guide to How Update Samsung Galaxy Ace S5830L (2.3.4 GingerBread ) S5830LUBKP7 Unbranded & S5830LUBKP8 Entel,Claro,Movistar)

Here' a step by step guide on how to manually upgrade to Android 2.3.4 Gingerbread for unbranded and branded version of Samsung Galaxy Ace S5830L like in Chile ENTEL,CLARO and MOVISTAR. This guide may works if the device is currently running Android 2.1 or 2.2 Froyo.

Download the specific firmware for your Samsung Galaxy Ace S5830L.

2.3.4 Stock ROM Unbranded
2.3.4 Stock ROM Entel
2.3.4 Stock ROM Movistar
2.3.4 Stock ROM movistar

OPS File
ODIN Multi Downloader v4.38

How to Flash Samsung Galaxy Ace S5830L Firmware using Odin.
Ensure to back up of all important files in the device.
Charge your phone before flashing.

1) Turn off your phone
2) Remove the SIM Card and SD Card
3) Unzip the. Zip file you downloaded(which is the flashing. Tar is inside, not decompress the. TAR).
4) Open ODIN 4.38
5) Select the file. TAR under the heading of "one package" and the. OPS OPS in the section, and leave all other sections blank.Then select the option of "one package."
6) Connect your phone to your PC via USB
7) When the screen turns on at the same time press and hold buttons VOLUME DOWN + ON + center button and wait for your phone into Download mode (an android with a shovel and yellow triangle).
8) If ODIN detects and recognizes your phone should turn on a light in the first square on the left side of the program.
9) Press the "Start" button and wait 'till the process completes. It only take about 5-10 minutes maximum.
10) If all goes well your phone will restart after it finishes.
11) If you see the"PASS" word means that the process has been successful and that you have the firmware installed.
12) Disconnect your phone from your PC
13) Turn off your phone
14) Turn it in recovery mode (POWER + VOLUME UP + center button) and do a wipe (Factory Reset).
15) Insert SIM card and memory ttu MicroSD.
16) Turn on your phone.

Posted in: Samsung,Samsung Galaxy Ace S5830,Stock ROM